User Manual
Table Of Contents
- 1 Introduction
- 2 Putting the Meter into Operation
- 3 Meter Setup
- 4 Testing a Blood Sample
- 5 Control and Proficiency Testing
- 6 Review Results (Memory)
- 7 Extended Functionalities
- 8 Maintenance and Care
- 9 Troubleshooting
- 10 General Product Specifications
- 11 Warranty
- A Appendix
- B Appendix
- C Appendix
- Index
Introduction • 1
31
Apply sample (the time left to apply sample is counted down in the
display)
Apply liquid control (QC) sample (the time left to apply sample is
counted down in the display)
Insert the test strip code chip
Insert the QC code chip
Automatic quality control completed successfully
Results are displayed as a Quick percentage value
Results are displayed in seconds
Results are displayed in INR units
Result in the chosen unit of measure is above the measuring range.
Result in the chosen unit of measure is below the measuring range.
Quality control: Result is above the specified range
Quality control: Result is below the specified range
Battery status:
■ When the battery pack is fully charged, all segments are lit.
■ Individual segments disappear one by one as the battery pack
becomes weaker.
■ When there is only one segment remaining the icon is displayed
in red.
■ When there is no segment remaining, you may not be able to finish
performing a test. Recharge as soon as possible.
Operation with power supply adapter
Time between midnight and noon (in 12-hour time format)
Time between noon and midnight (in 12-hour time format)
Button/Icon Meaning
QC
QC
%Q
SEC
INR
am
pm