Operator`s manual

7
General Information
Your system is ready to use when it
has been charged in the base unit.
Meters can be configured according
to your institution’s needs, and
features, such as requiring an
operator ID, may or may not be used.
If so configured, the ACCU-CHEK
Inform II system may not allow
patient testing when controls have
not been run (QC Lockout).
Note on the use of “base unit”
Unless otherwise specified, the
term “base unit” refers to both the
ACCU-CHEK Inform II Base Unit and
the ACCU-CHEK Inform II Base Unit
Light.
General Information