Operator`s manual

Initial Startup
100
This display is visible when no communication takes
place.
This display is visible when software updates are trans-
ferred to the meter.
Note:
■ If the meter transfers data wirelessly immediately
after a test, this communication is not visible on
the display. The display remains unchanged
(usually in the Main Menu view after a test).
■ If a meter is in standby (but not docked) and
communicating wirelessly, this communication is
not visible on the display. The display remains
blank.
Docked 12:48pm
03/16/10
Idle
Docked 12:48pm
03/16/10
Updating Software...