Operator`s manual

Powering Up and Entering an Operator ID

Adjusting the display Using the Display options, you can adjust display param-

eters to your needs:

■ Adjust the display contrast to the ambient light

conditions.

■ Set the time interval for activating the Low Power

Mode, which reduces the display contrast after a

configurable time without activity (e.g., touching

the screen) to conserve energy.

1 In the Power Up screen, touch Contrast. The Display

screen appears.

2 Touch or to set the time until Low Power

Mode is activated.

3 Touch or to make the display lighter or

darker.

4 Touch to confirm the setting.

Adjusting the display on meters

with older hardware

While the meter is turned on, you can switch the back-

light on or off at any time by pressing for more than

1.5 seconds and releasing it.

■ You can adjust the display contrast as described

above.

■ The function Low Power Mode is not available.

Display 12:48pm

03/16/10

Lighter Darker

Low Power Mode after:

30s

The following description applies to meters with a

serial number below UU11030000.