Operator`s manual

Glucose Control Testing
54
Inserting test strips After confirming the test strip lot, you are prompted to
insert the test strip.
1 Remove the test strip from the test strip vial and
close the vial again with the cap.
2 Hold the test strip so the lettering “ACCU-CHEK” is
facing upward.
3 Slide the test strip into the test strip port as far as it
goes in the direction indicated by the arrows on the
test strip. The meter beeps.
Control Test 12:48pm
03/16/10
Control L2 (Hi) 123456
Strip Lot 545794