Operator`s manual

Glucose Control Testing

Applying the control solution Once the meter has detected the test strip, you are

prompted to apply the control solution.

1 Wait until the flashing drop appears in the display

before applying the control solution.

2 Apply a drop of glucose control solution to the

front edge of the test strip. Do not apply the

control solution to the top of the strip.

The control solution is pulled into the test strip by

capillary action.

Once sufficient control solution has been detected, the

meter beeps and the measurement begins.

Control Test 12:48pm

03/16/10

Control L2 (Hi) 123456

Strip Lot 545794