Operator`s manual

Initial Startup
93
9 Initial Startup
Connecting the base unit
1 Slide the base unit upward and remove it from the
wall mount (if in use).
2 Connect the power cord to the proper outlet.
3 If you want to connect the Accu-Chek
Inform II Base Unit in a wired environment:
Connect the ethernet (RJ45) cable or the USB cable
to the respective outlet. Use only the USB cable
provided with the Accu-Chek Inform II system.
4 Slide the base unit back onto the wall mount (if in
use).
NOTICE
To ensure continuous safe and reliable operation, use
only the power supply unit provided for the Accu-Chek
Inform II system (for ordering information see page 139).
For details on configuring the Accu-Chek Inform II
Base Unit, consult your Roche representative.