Technical information

Chapter 1: Understanding Your New System ACCU-CHEK Customer Care Service Center 1-800-858-8072
3. Press . The
hour will flash.
4. Press to
change the hour.
a
5. Repeat Steps 3 and 4
to change the
minutes, year, month,
day, and beeper
setting (on or off).
Leaving the beeper
on is recommended.
6. Press twice to
finish set-up and
turn off the meter.
Setting the Beeper
The beeper is designed to make the ACCU-CHEK Active meter easier to use, but you can turn it off and not
affect your test results in any way. When you first get your meter, the beeper is set to “On” and sounds
whenever:
• Sufficient blood or control solution is applied to a test strip.
• A result or message is displayed.
• An error occurs while testing (the beeper sounds twice).
You may hold the button
down to scroll forward quickly.
15