User`s manual

Testing blood glucose3

You can also open the tip cover if the meter is already

turned on. In this case, the meter then switches to Test.

It advances a test area to the tip of the cassette and

then the prompt Apply blood appears.

The following are the exceptions:

If you are in the



Settings menu entering a number

(e.g. to change the time) or in the selection list (e.g.

to change the volume): in this case, when you open

the tip cover you will be asked whether you really

want to perform a test (see Chapter 16.2).

If you had turned on the meter using the



button (see Chapter 5.1 and 13): In this case, the

meter does not switch to Test. You must rst turn off

the meter. Then you can start the blood glucose test

either by opening the tip cover or via the Main menu

(see next page).