User manual

6. Apply the Blood Within 15 seconds of sticking
the fingertip, apply the blood
to the target area of the test
strip—either from the top or
side of the test strip.
Hold the blood drop to the
test strip until you hear a beep.
The flashing blood drop symbol
disappears.
Do not add more blood to
the test strip. Do not touch
the test strip.
The result appears in about
1 minute.
5. Identify the Target Area Find the target area on the
test strip.
You can dose the target area by
bringing the patient’s finger to
the top of the test strip or by
bringing the meter to the
patient’s finger so that the side
of the test strip touches the
blood drop.
2322
7. Record Result Record the result according to
your facility’s guidelines.
8. Clean Up Place the used test strip
and lancet in an approved
container. Turn the meter
off .
If the meter is dirty, wipe it clean
with a CoaguWipe™ Bleach
Towel or other recommended
cleaner.