User manual

3130
2. View Most Recent Result The most recent test result
appears. The letters mem
indicate that you are viewing a
result in memory. The time
and date of the test also
appear. If there are no results
in memory, a 0 appears in the
display’s top-right corner.
Storing Test Results in Memory
The CoaguChek XS Meter automatically stores up to 100 test
results and their dates and times in its memory. If the memory is
full when you perform a test, the oldest result is automatically
deleted. The most recent result is always saved.
Note: All test results, including their date and time, remain in memory
even when the meter is without batteries.
Reviewing Stored Test Results
You can review stored test results even when the meter’s battery
power is low.
To review results in memory:
Memory
1. Access the Memory
Press the M button .
The meter turns on, if it is
not already on, and goes to
Memory mode.
3. View Earlier Results To view earlier results, press
the M button again .
After you have viewed all the
results in the memory,
3 dashes appear.