User manual

2. Confirm

Press the M button to

confirm that you want to erase

the entire memory.

Note: To exit Erase mode without

erasing the results, press the

ON-OFF button instead.

The hourglass symbol flashes

while the test results are

being erased. Then, the

counter is set to 0 and 3

dashes appear.

Erasing Stored Test Results

You can erase all of the test results that are stored in the meter’s

memory. You cannot, however, erase individual test results.

To erase all stored results:

1. Go to Erase mode. With the meter turned off,

press and hold down the

M button . While you are

holding down the M button,

press the ON-OFF button

and then hold down both

buttons for at least 5 seconds.

The meter displays mem

(flashing) and clr. The

number of results in memory

is shown in the top-right

corner of the display.