User manual

Symbol Meaning
Battery status:
• When the batteries still have their full
charge, all segments are lit.
• Individual segments disappear one by one
as the batteries become weaker.
• When there is no segment remaining, you
can no longer perform a test. You can,
however, still access the meter’s memory.
The meter is in Memory Mode.
Automatic quality control completed
successfully
Reports an error (see Error messages)
Room or meter temperature is outside the
acceptable range.
Communication is taking place via the
infrared interface
Measurement chamber cover is open.
5352
Symbol Meaning
Beep tone is turned on
Beep tone is turned off
Result is above the chosen therapeutic range
(only with INR as unit)
Result is below the chosen therapeutic range
(only with INR as unit)
• Results in the chosen unit
• Error numbers
Memory contains no results or no further
results
Displays the time in HH:MM format
Displays the date in DD-MM-YY,
MM-DD-YY or YY-MM-DD format.
The monitor is in Setup Mode.
Indicates the code number of the code chip
inserted in the meter.
Result in the chosen unit is above the
measuring range.
Result in the chosen unit is below the
measuring range.