Instructions for Use

2. Install the elevator servo arms and linkage rods as shown in Figures 3 and 4.

3. Attach the main landing gear using 3 PM 3.0 X 10mm screwsas shown in Figure 5.

4. Find the Y-harness and connect it to both aileron servos.Connect the Y-harness to the receiver, then place

the receiver into the fuselage as shown in Figure 6 .

1. Unpack the elevator parts bag and assemble PA 2.3*10 mm and connecting pipe as shown in Figure 1 and 2.

Assemble the plane

HKM 3.0 x 10

KA2.6*12mm

fig1 fig2

fig3

fig4

fig5 fig6