Quick Installation Guide AC2100 Tri-band Whole Home Mesh Wi-Fi System Model No. RSD0613 (3-pack) 24hour Online After-sales Service Scan QR Code To Visit https://rockspaceworld.com Email: techsupport@rockspace.
In the box Mesh node x 3 Ethernet cable x 1 Power adapter x 3 Quick Installation Guide x 1 Get to know your device 10/100/1000Mbps WAN/LAN port 10/100/1000Mbps LAN ports DC power jack Reset button Power DC-IN Mesh
Ⅰ Download the RS WiFi app Download the RS WiFi app to your mobile device from App Store / Google Play, or by scanning the QR code below. Ⅱ RS WiFi Connect the primary node * The first Mesh box you set up functions as the primary node, while the rest are referred to as the secondary nodes.
1. Plug one of the nodes (note: this is your primary node) into an outlet using the included power adapter. The LED indicator turns solid green. 2. Connect one end of the included Ethernet cable to the LAN port of your modem and the other end to the WAN/LAN port of the primary node. The indicator light will be solid green, indicating the system is ready for setup. Ⅲ Set up the primary node 1. Open the Wi-Fi menu on your smart device. Select the primary node's SSID (network name) to connect.
LAN1 LAN2 WAN/LAN Power DC-IN www.rockspace.hk Made in China AC2100 Tri-band Whole Home Mesh WiFi System Model: RSD0613 Power: 12V 1.5A FCC ID: V7TMESH12 IC: 9034A-MESH12 MAC: SN: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. Go to your mobile and open the RS WiFi app.
4. Create your Wi-Fi Name and Password. Tap OK. Note: Your mobile phone will disconnect from the original mesh Wi-Fi network. Please reconnect to the new wireless network. 5. You have set up the primary node successfully.
Ⅳ Connect the secondary nodes 1. Choose a proper place. − Place it out in the open and don’t put it on the floor. − Keep your nodes away from electronic interference, such as microwaves, TVs, refrigerators, etc.
2. Connect the nodes. Method 1: Power on the other two nodes, they will automatically be added to the mesh network. The LED indicator will turn into solid green. If method 1 fails, try method 2. Method 2: On the RS WiFi app, tap Settings > Add rock space mesh, scan the QR code on the back of the node to add. After setup, you can use the LED indicator to determine an ideal location to place your node.
FAQ Q1: How can I connect my devices, such as a home security camera or printer, to the 2.4 GHz signal? Run the RS WiFi app, tap Settings > Smart Assistant > Enable. The mesh system will switch to the 2.4 GHz band in the following 30 minutes. After half an hour, the connection would be automatically terminated and switch back to the 5 GHz band, while your 2.4 GHz devices will still be connected to the 2.4 GHz band.
LED indicator description After a node is powered on, the LED indicator lights solid green for about 40 seconds to complete startup.
Shenzhen Renqing Excellent Technology Co., Ltd. Address: 104, No.15, Longfu Industrial Zone, Huarong Road, Tongsheng Community, Dalang Street, Longhua District, Shenzhen, China Email: techsupport@rockspace.cc Website: www.rockspace.cc Technical Phone Support: +1(833)816-6558 Service Time: EST: 9:00-17:00 / PDT: 06:00-14:00,from Monday to Friday 24hour Online After-sales Service: https: //rockspace. afterservice. vip *NOTE: Please go to the rock space official website to download specific using instructions.
