User's Manual

①Tap【Increment cutting amount】on the home page，and input
specific code to increase the cut amount or scan the QR code.
1 2 9
43 6
7 8 10
13
14
4、WiFi Setting
① ②
③ ④
① ②
③
⑤
④
Bluetooth APP Control System
①Prepare a sheet film to be cut, confirm that the protective
film is flat and the film layer is complete
without bending, folding or missing layers
②Place the sheet film to the area shown.
③The machine will automatically pick up the film paper.
3、Place materials
2、Install the blade holder & blade
①Open the storage box
②Pull the paddle of holder clamp, adjust
the length of the blade tip, and put the
blade holder inside (Gear 5 for the blade
holder is recommended).
③Push back the paddle and fix the
blade holder.
④Cover the storage box.
Refer to the dotted line for the placement of the diaphragm
Do not put your hands in the cutting area in case of harm
Machine settings
On the homepage, click [ Setting] to enter the setting
interface, and click [Language Setting] to switch.
The protective film will be pushed out when the cutting finished.
6、Complete cutting
1、Language setting
① ②
③
2、Blade force/Speed/Automatic
① ②
3、Firmware system upgrade
4、Self-help add cutting counting
③
① ②
①
① ② ③
②
③
3、Child lock
5、Language settig
① ②
④ ⑤
③
6、Sensor
4、Mirror function
① ② ③
① ②
④ ⑤
③
① ② ③
6、Blade force/Speed/Automatic
7、Firmware system upgrade
① ② ③
8、Self-help add cutting counting
① ② ③
① ② ③
User manual
Standard Accessories
Smart Plotter ZC2-Lite
Blade
Blade holder
Power adapter
Power cord
①
Power button: Turn on the device
②
Blade holder: Cutting protector sheet film
③
Storage box switch: store blade holders, blades
④
Blade holder clamp: fixed blade holder
⑤
Axis: Fix the protector sheet film
⑥
LCD Screen
⑦
Sensor: Auto feed sheet film
⑧
Power connector
⑨
USB port interface
⑩
WIFI port
11
12
5、Start cutting
1、APP download link please check with seller.
12
Blade adjustment: Rotate to adjust gear to
control the length of the blade tip.
13
Blade holde
14
Blade tip: Adjust the exposure length
accordingly to the material thickness.
"+" direction means to lengthen blade tip;
"-" direction means to shorten blade tip.
11
Press the top to replace the blade.
Instructions
1、Power on
①Connect the power supply with the adaptor and insert
to the socket. Use 100-240V AC power supply to make
the device operate normally.
②Insert the other end of the adaptor port into the power
interface.
③Press the power button to power on the cutter.
Smart Plotter ZC2-Lite
Appearance and function
Machine back side
Click [ Setting] on the homepage, enter the setting
interface, click [WiFi Settings], connect to WiFi, enter the
password, and wait for the machine to successfully connect
to the WiFi network.
Select the brand and model of the device to be cut on
the homepage and click [Start Cutting] to start cutting.
①On the home page, click [ Setting] to enter the setting
interface, click [Force/Speed/Sensor], please adjust according
to actual usage. If the sensing function is not needed, turn
off automatic.
①Tap【 Setting】-【System information】on the homepage
to update the firmware version. The password is 1212.
②Tap【 Setting】-【Restart】on the home page to restart
cutter for data updating.
①Tap【 Setting】-【Increment cutting amount】on the
home page，and input specific code to increase the cut amount.
1.Power on the cutter 2.Run the mobile phone APP application,
confirm that the mobile phone's Bluetooth is turned on, find
the Bluetooth name of the machine on the page, and then
click it. Enter the pairing code to connect to Bluetooth, and
then wait for the machine to successfully connect to Bluetooth.
①Tap【 Setting】-【force/ speed/sensor】on the home page，
and ativate the option 【sensor】.
①Choose the options【 Child Lock】,After clicking
【Blade/Speed/Automatic】，activative the Child lock function
②Choose any model and hold on button “send” 3 senconds
for sending to cut
①Choose the options【Mirror cutting】,After clicking
【Blade/Speed/Automatic】，activative the Mirror cutting
function.
①Tap【 Setting】-【Language】on the home page，
and choose the correct Language for cutter.
①On the home page, click [ Setting] to enter the setting interface,
click [Force/Speed/automatic], please adjust according to actual
usage.Speep 2, Force 3.If the sensing function is not needed,
turn off automatic.
①Tap【 Setting】-【System information】on the homepage
to update the firmware version. The password is 1212.
②Tap【 Setting】-【Restart】on the home page to restart cutter
for data updating.
FCC Statement
This equipment has been tested and found to Comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all
persons and must not be co-located for operating in conjunction with any other
antenna or transmitter.
Model
Max. media width
Max. cutting width
Cutting precision
Repeat precision
Max. straight line cutting speed
Max. curve cutting speed
Max. force
Connector interface
Input
Power
Working environment
Packing size
Packing gross weight
Net weight
ZC2-Lite
205mm
195mm
0.1mm
0.1mm
250mm/s
200mm/s
1000g
Wifi 2.4G
110V-240V
<100W
+5°C -- +35°C
525*315*220mm
5.4kg
4.4kg
Data date 2021-07-27 12：00：00
SK
Device No :
Cut amount Balance
Phone
Increment cutting amount
Language setting Restart /Shutdown
Date cleaning Statistics
Force /Speed/Induction
WiFi Setting System information
Setting
Data date 2021-07-27 12：00：00
SK
Device No :
Cut amount Balance
Phone
SK
Device No :
Cut amount Balance
Phone
Increment cutting amount
Language setting Restart /Shutdown
Date cleaning Statistics
Force /Speed/Induction
WiFi Setting System information
Setting
Data date 2021-07-27 12：00：00
SK
Device No :
Cut amount Balance
Phone
Increment cutting amount
Language setting Restart /Shutdown
Date cleaning Statistics
Force /Speed/Induction
WiFi Setting System information
Setting
Select Wi-Fi
ON
Select Wi-Fi
ON
Phone
Apple HUAWEI HONOR Samsung
XIAOMI REDMI MEIZU ONEPLUS
SK
Device No :
Cut amount Balance
Phone
P10 Plus > P30 >
P20 > P30 Lite >
P20 Lite > P30 Pro >
P20 Plus > P40 >
HUAWEI
HUAWEI
P40—（Front Shell）P40—（Front Full） P40—（Back Cover） P40—（Half Cover）
SK
Device No :
Cut amount Balance
P40—（Front Full）
START CUTTING
Language
force/speed/automatic
Brightness
speed Blade force
1st gear 2nd gear
3rd gear 4th gear
shut
Slightky
bright
Zhongli
ang
All
bright
1st
gear
2nd
gear
3rd
gear
4th
gear
5th
gear
system infromation
Device model:
Software version:
hardware version:
Unique ID:
Fault code:
system infromation
Device model:
Software version:
hardware version:
Unique ID:
Fault code:
Version update
BACK NEXT
Increment cutting amount
Please enter Increment cutting amount barcode
CONFIRM
Data date 2021-07-27 12：00：00
Increment cutting amount
Language setting Restart /Shutdown
Date cleaning Statistics
Force /Speed/Induction
WiFi Setting System information
Setting