Specifications

Chapter 12. Plugins 122
Audio Options Open Audio Options submenu – see below.
Resume Options (default: Start menu) Enable/disable the start menu.
Play Mode (default: Single) Set to All to play multiple .mpg files in the directory
continuously.
Clear all resumes: x Discard all x resume points.
Display Options Menu
Dithering (default: off) Prevent banding effects in gradients by blending of colours.
(only available on Sansa e200, Sansa c200 and Gigabeat F/X)
Display FPS (default: off) This option displays (once a second - if your video is full-
screen this means it will get overwritten by the video and appear to flash once
per second) the average number of frames decoded per second, the total number
of frames skipped (see the Skip Frames option), the current time (in 100 Hz ticks)
and the time the current frame is due to be displayed.
Limit FPS (default: on) With this option disabled, mpegplayer will display the video
as fast as it can. Useful for benchmarking.
Skip frames (default: on) This option causes mpegplayer to attempt to maintain real-
time playback by skipping the display of frames - but these frames are still decoded.
Disabling this option can cause loss of A/V sync.
Audio Options Menu
Tone Controls (default: force off) Use the bass and treble control settings or force them
off.
Channel Modes (default: force off) Use the channel configuration setting or force Stereo
mode.
Crossfeed (default: force off) Use the Crossfeed setting or force crossfeed off.
Equalizer (default: force off) Use the Equalizer setting or force the equalizer off.
Dithering (default: force off) Use the Dithering setting or force audio dithering off.
See this page in the Rockbox wiki for information on how to encode your videos to
the supported format. ZPluginMpegplayer
The Rockbox manual (version rUnversioned directory-150516) Sansa Clip+