Bluetooth Stereo Headset RF-BTHP02 User Guide
Bluetooth Stereo Headset Contents Features ......................................................................... 3 Package contents ................................................ 3 Components ......................................................... 4 Using your headset.................................................... 5 Charging the battery ......................................... 5 Turning your headset on or off ...................... 6 Pairing your headset .......................................
Specifications ............................................................ 13 Legal notices.............................................................. 13 One-year limited warranty ................................... 15 Features • Wireless Bluetooth connection to your wireless MP3 player, mobile phone, or PC • Behind-the-head design • Three EQ sound modes • Supports HSP, HFP, A2DP, AVRCP, and Bluetooth 2.
Components # 1 2 3 4 5 6 7 8 4 Component Volume – button Power/talk button Volume + button LED Microphone Backward button Play/pause button Forward button Description Press to decrease the volume. Press to increase the volume. Press to go to the previous song. Press to start or pause playback. Press to go the the next song.
# 9 Component USB port 10 Speakers Description Connec the USB cable to this port and a USB port on a computer to recharge the battery. Produce sound from the headset. Using your headset Charging the battery Your headset comes with a internal rechargeable battery. To charge or recharge the battery: 1 Turn off your headset. 2 Connect your headset to a computer using the provided USB charging cable or a power outlet using the provided AC adapter. When the red LED changes to blue, charging is complete.
3 When the battery is fully charged, unplug the USB cable or AC adapter from your headset. Note: The first time you charge the battery, leave your headset connected to the USB cable or AC adapter at least two hours. Note: When the battery charge is low, the red LED flashes and an alarm sounds. Turning your headset on or off To turn on your headset: • Press and hold (talk) for about three seconds. The blue LED starts blinking.
Pairing a phone to your headset Connecting from the phone Select RF-BTHP01 or RF-BTHP02 from the list of paired devices on the phone. Connecting from your headset When you turn on your headset, it automatically connects to the last device it was connected to. Multi-pairing method Before you can connect your headset to two devices, you must pair to each device individually using the appropriate profiles. For phone conversation, use the HSP or HFP profile. For high quality audio, use the A2DP profile.
Using phone functions Note: If you connect a phone and an MP3 player, the device you connect last has priority. For example, if you connect a phone, then connect an MP3 player, you can answer the phone while listening to music, but you cannot use the phone’s redial or voice recognition functions because the MP3 player controls the buttons. To use phone functions: • To voice dial, press (talk) once to activate voice dial. (Some phones may not support this function.
Listening to music Note: If you connect a phone and an MP3 player, the device you connect last has priority. For example, if you connect a phone, then connect an MP3 player, you can answer the phone while listening to music, but you cannot use the phone’s redial or voice recognition functions because the MP3 player controls the buttons. Note: The Bluetooth device you connect must support AVRCP (Audio Video Remote Control Profile).
To select a sound mode: • While in play/pause mode, quickly press twice (play/pause). Resetting your headset To reset your headset: • Press (play/pause), , and at the same time. Note: The pairing information is retained. When you turn on your headset, it automatically connected to the last connected device. LED status information Powering on Headset status LED Blue LED is on. Powering off Red LED dims, then disappears. Low battery Red LED continues to blink. Recharging Red LED stays on.
Maintaining • Do not place your headset near fire. The battery may explode. • Do not drop or apply excessive force to your headset. You may damage it. • When storing your headset for an extended period of time, store is in a dry place and avoid extreme temperatures. • If your headset gets wet, avoid exposure to heat or an electrical current. Contact a service center or the store where you purchased your headset. • Do not use any charging device except the device that came with your headset.
Troubleshooting Problem I cannot turn on my headset Solution Your headset turns off when the battery charge is low. Re-charge the battery. I do not get as much talk time as I The battery is a expendable product and used to battery life diminishes over time. Battery life is also dependent on conditions of use. I cannot pair my headset with other Your headset only works with devices that devices support the HSP, HFP, or A2DP profile.
Specifications Bluetooth version Supported profiles Frequency spectrum Working distance Operating temperature Operating time Standby time Product dimensions (L × W × H) Product weight Average charging time Version 2.1 A2DP, AVRCP, HFP, HSP 2.4 ~ 2.4835 GHz Maximum 33 ft. (10 m) 14° to 140°F (-10° to + 60°C) Talk: 8 hours Music: 7 hours 150 hours 5.5 × 5.4 × 1.9 in. (141 × 138 × 50 mm) 1.2 oz. (34g) 2 hours Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules.
This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
One-year limited warranty Rocketfish Products (“Rocketfish”) warrants to you, the original purchaser of this new RF-BTHP02 (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for one (1) year from the purchase of the Product (“Warranty Period”). This Product must be purchased from an authorized dealer of Rocketfish brand products and packaged with this warranty statement. This warranty does not cover refurbished Product.
How to obtain warranty service? If you purchased the Product at a retail store location, take your original receipt and the Product to the store you purchased it from. Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. If you purchased the Product from an online web site, mail your original receipt and the Product to the address listed on the web site.
This warranty also does not cover: • Damage due to incorrect operation or maintenance • Connection to an incorrect voltage supply • Attempted repair by anyone other than a facility authorized by Rocketfish to service the Product • Products sold as is or with all faults • Consumables, such as fuses or batteries • Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.
RF-BTHP02 19
www.rocketfishproducts.com (800) 620-2790 Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN 55423-3645 USA © 2010 BBY Solutions, Inc. All rights reserved. ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand names are trademarks of their respective owners.