Quick Setup Guide Owner's manual
QUICK SETUP GUIDE
InvisiShell™
|
RF-GWU1301
Installing your InvisiShell™
1 Disconnect the Wii U GamePad.
2 Open the InvisiShell, then orient and align the GamePad with the
InvisiShell.
3 Gently press the GamePad into the InvisiShell.
4 Close the top half of the InvisiShell, then press down on the right side of
the InvisiShell until the side snap clicks into place. Repeat on the left side.
5 While rmly holding the GamePad, press rmly up on each tab to lock the
InvisiShell closed.
Removing your InvisiShell
1 Disconnect the Wii U GamePad.
2 While firmly holding the GamePad,
press firmly down on each tab to
unlock them.
3 Open the InvisiShell by using your ngertips
to slowly separate the InvisiShell on the right side until the side snap
releases. Repeat this on the left side.
4 To remove the GamePad, firmly hold the InvisiShell and gently press the
ZR or the ZL button to lift the GamePad out.
90-day limited warranty
Visit www.rocketfishproducts.com for details.
Contact Rocketfish:
For customer service, call 1-800-620-2790
www.rocketfishproducts.com
™ and © 2012 Nintendo. Licensed by Nintendo.
ROCKETFISH is a registered trademark of BBY Solutions, Inc. Registered in some countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2012 BBY Solutions, Inc. All Rights Reserved.
ENGLISH 12-1021
Tabs
Side snaps
Unlock
Tabs
Side snaps
Lock