User Manual
Table Of Contents
- Contents
- ENGLISH
- Introduction
- Specifications
- Before you begin
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Prepare your TV
- STEP 2 - Adjust the soundbar mount arms
- STEP 3 - Assemble your soundbar mount
- STEP 4 - Determine the TV screw diameter
- STEP 5 - Determine whether your TV has a flat, irregular, or obstructed back
- STEP 6 - Install the soundbar mount on your TV
- STEP 7 - Install your soundbar to the arms
- STEP 7A - Back-mounted key hole slots
- STEP 7B - Back-mounted threaded inserts
- STEP 7C - Bottom-mounted threaded inserts
- STEP 8 - Hang your TV
- STEP 9 - Adjust the soundbar height (optional)
- STEP 10 - Adjust the soundbar depth (optional)
- LIFETIME LIMITED WARRANTY
- ESPAÑOL
- Introducción
- Especificaciones
- Antes de comenzar
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Prepare su televisor
- PASO 2: Ajuste los brazos de montaje de la barra de sonido
- PASO 3 - Ensamble el montaje de la barra de sonido
- PASO 4 - Determine el diámetro del tornillo para el televisor
- PASO 5 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida.
- PASO 6 - Instalación del montaje de la barra de sonido en su televisor
- PASO 7 - Instalación de su barra de sonido a los brazos
- PASO 7A: Ranuras de bocallave para el montaje posterior
- PASO 7B: Insertos con rosca de la parte posterior
- PASO 7C - Insertos con rosca de la parte inferior
- PASO 8 - Sujete su televisor
- PASO 9: Ajuste de la altura de la barra de sonido (opcional)
- PASO 10 - Ajuste de la profundidad de la barra de sonido (opcional)
- GARANTÍA LIMITADA DE POR VIDA
10
STEP 5 - Determine whether your TV has a flat, irregular, or obstructed back
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches.
2 Temporarily lay your soundbar mount assembly on the back of your TV.
3 Align the screw holes in the horizontal soundbar bracket with the mounting screw holes on your TV.
4 Identify which type of back your TV have:
• Flat back: The bracket lays flush against the back of your TV and doesn’t block any jacks. You don’t need TV
wall-mount spacers. Go to STEP 6 - Install the soundbar mount on your TV
on page 11.
• Obstructed back: The bracket blocks any of the jacks on the back of your TV. You need TV wall-mount spacers. Go to
STEP 6 - Install the soundbar mount on your TV
on page 11.
• Irregularly-shaped back: There is a gap between the brackets and some part of the back of your TV. You need TV
wall-mount spacers. Go to STEP 6 - Install the soundbar mount on your TV
on page 11.