Electronic Crossover Owner's Manual

DESIGN FEATURES
REMOVING THE COVER
The design of the 2X, 3X and 5X allows the cover to be removed for
access to the crossovers and ease of installation. The cover can be
installed in either direction to match the rest of the system. The top end
of the cover has two tabs which fit snugly into slots at either end of the
base. Care must be taken not to bend the securing tabs when removing
the top cover. A screw secures the cover. Remove this screw to release
the cover for removal.
Punch 3X - Top Inside View
7
Front Input
Rear Input
1
3
2
Rem
B+
GND
7
Front Output
Dual Filtered Non-Faded Output
Rear Output
4
5
6
8
1
– 2 –
Rem
B+
GND
3
Input
1
1
Output
Output
4
7
2
Punch 2X - Top Inside View
8