N LJ PMX-OR Q . /· \ ELEMENT4t tt2>READY Serial Number: _ _ _ _ __ Date of Purchase: _ _ _ _ __ Installation & Operation
Dear Customer, Congratulations on your purchase of the world's finest brand of audio products. At Rockford Fosgate we are fanatics about musical reproduction at its best, and we are pleased you chose our product. Through years of engineering expertise, hand craftsmanship and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve.
If, after reading your manual, you still have questions regarding this product, we recommend that you see your Rockford Fosgate dealer. If you need further assistance, you can call us direct at 1-800-669-9899. Be sure to have your serial number, model number and date of purchase available when you call. Safety This symbol with "WARNING" is intended to alert the user to the presence of important instructions. ~WARNING Failure to heed the instructions will result in severe injury or death.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide more reasonable protection against harmful interference in a residential installation. Operation is subjected to the following two conditions: (1) This device may not cause harmful interference, and (2) the device must accept any interference received, including interference that may cause undesired operation.
REV I FWD button Rotary Encoder This knob is for adjusting main volume, zone volumes, menu navigation and setting adjustments. Use this button to skip back and forward through channels or tracks with a short press. Long pressing will activate manual seek mode. POWER button This button allows you to power the unit ON and OFF by short pressing. PEQ button ~-+-+-: Pressing this button give you access to change the PEQ level. Use the rotary encoder to adjust PEQ levels (0-12).
Mounting To mount the unit, you will need to find a flat surface with adequate clearance behind that provides enough clearance for the unit and all it's necessary wiring. 1. Once you have determined a mounting location, you will need to cut a circular hole 2" (52mm) in diameter. 2. After the hole is cut slide the unit and wiring into through the hole. 3. Take the U bracket and slide over the two studs on the back of the unit. Tighten down with supplied nuts. 4.
Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms: Length of Warranty POWER Amplifiers- 2 Years BMW® Direct Fit Speakers- 2 Years Source Units -1 Year All other products - 1 Year Any Factory Refurbished Product- 90 days (receipt required) What is Covered This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or its possessions.
Installation assistance available at: RFTECH www. rockfordfosgate. com/rftech ro c ..c. u c ""0 Q) ...... c ·;:: a.. u I ...... 0I N "¢ "" 0'\ "" 0 I M N ...... 600 South Rockford Drive • Tempe, Arizona 85281 United States Direct: (480) 967-3565 • Toll Free: (800) 669-9899 \() ROCKFORD FOSGATE.
