Owner's Manual

Source Unit
·--
·----
Optional Accessory
PLC2 (T400X2ad/T500X1bd}
Switched 12V to REM
(NOT Required if using high level inputs.
Refer to manual for more information.)
======rn------
&CAUTION
Be sure to connect speakers and
Punch level Control - PlC
(if equipped) after amplifier
output clip adjustment.
(see reverse)
INPUT
FRONT REAR
NEG
REAR
LEFT (+)GREEN
LEFT (-) GREEN / BLACK
RIGHT(+) PURPLE
RIGHT(-) PURPLE/BLACK
Battery
~ess than 18"
+
POS
REAR FRONT
SPEAKERS
Amplifier Quick Setup
FRONT
LEFT (+)WHITE
LEFT (-) WHITE/BLACK
RIGHT(+) GRAY
RIGHT(-) GRAY/BLACK
Connect to chassis
ground of vehicle
*Keep grounds as short as possible.
For Motorsport and Boat applications,
the ground wire should go directly
to the negative battery terminal.
• Specifications subject to change without notice. Image s depict typical setup.
Refer to manual for additional wiring options.
WIRE HARNESS COLOR CODE
--·~~~b------------------------------~