User's Manual

Disarming / Unlocking:

Press the Unlock Button on the remote control. The System will disarm and confirm with two

chirps, two light flashes, and the LED will turn off. Power locks will unlock and Interior

Dome light will turn on (if installed with these optional features). The 2-Way LCD Pager will

confirm with “System Disarmed” while displaying an Unlock symbol.

Driver’s Door Priority Unlock: Optional connection required

This option separates unlock of the driver’s door from the passenger doors with the remote

control. There are 2 choices of operation.

• Default = Press and hold the Unlock Button for 2 seconds to unlock all doors.

• Press the Unlock Button 2 times to unlock all doors.

This is Remote Channel 2 output (Option # 10). This output can also be programmed for

other auxiliary functions, consult your installer.

Silent Arming: Scroll-Wheel Down

To Arm without chirps, press the Silent Arm button # 1. The 2-Way LCD

Pager will confirm with “System Armed”.

Silent Disarming: Scroll-Wheel Down

To Disarm without chirps, press the Silent Disarm button # 2.

The 2-Way LCD Pager will confirm with “System Disarmed”.

Arm without Shock Sensor Zone: Scroll-Wheel Down

To arm the system without the shock sensor zone, press button # 3.

The 2-Way LCD Pager will confirm with “System Armed”.

Panic Mode: Ignition Key OFF Scroll-Wheel Down

To sound the alarm in an emergency situation or to draw attention to

your vehicle, press Button # 4 until the siren / horn sounds. The alarm

will sound for 30 seconds. Press the Lock or Unlock Button to reset

panic mode.

Note: On 1-Way Sidekick remote, press the Buttons at the

same time.

Plus