User's Manual

Manual Arming Mode:

The alarm system can be Manually Armed and Disarmed without the remote control. The

door entry will change to a 20 second delay to allow disarm without sounding alarm. This is

useful if you don’t have a remote control or go swimming.

To Activate Manual Mode:

1. Turn Ignition Key off.

2. Press Valet Override Button 3 times and exit vehicle.

3. The system will arm 10 seconds after closing the door.

4. Disarm by Ignition On and press Valet Override button 4 seconds.

Valet Mode: Solid Blue LED

Valet Mode is disables the Alarm and Remote Engine

Starting for vehicle servicing. The alarm system must

be disarmed to enter Valet Mode.

• To Activate Valet Mode Manually: Turn the

ignition on and press the Valet / Override button

(about 6 seconds) until the LED turns on solid.

Repeat the process to exit VALET Mode (you hear (2) siren chirps).

• To Activate Valet with the remote, press the remote’s Lock and Unlock button

(about 6 seconds). Repeat this step to exit Valet Mode with the remote control.

Emergency Override (Disarm without Remote)

If you have lost the transmitter or it stops working for any reason and the Alarm is armed,

you will have to disarm the system manually. Open the door with the key [alarm will sound],

turn the ignition on, and press the Valet / Override button for about 5 seconds. The Alarm

will disarm and allow you to use the vehicle until you can repair / replace the remote.

Ignition Controlled Door Locks: (Option # 2)

The doors will automatically lock when the ignition is turned on and will unlock when the

ignition is turned off. This feature can be programmed on, off, to lock the doors only or

unlock the doors only. Doors will not lock if they are open to prevent locking the keys in.

Alarm Triggers:

If there is an intrusion into the vehicle, a hard impact to the body or

the ignition is turned on; the alarm will sound and flash the lights for

30 seconds. If a door is left open after an intrusion then the unit will

cycle once and continue to protect the other un-tampered or

unopened zones. The LCD remote will keep a detailed record of the

trigger zone, time and date and vehicle number (up to 4 trigger

violations)