User's Manual

7
Arming Reminder: (Option # 6-1 = ON, # 6-4 = OFF)
If Passive Arming is turned off, there is a reminder to arm the system 15 seconds after
closing the last door. The system will chirp 4 times to remind you to arm the alarm.
Active Rearm: (Option # 5-4)
Active Rearming means that the system will re-arm itself 30 seconds after being disarmed
with the transmitter if a door has not yet been opened. This is handy if the vehicle is
accidentally disarmed (via the transmitter in your pocket) without you knowing it. This
feature can also be turned off in programming.
Auto Rearm: Failsafe Protection (Option # 5-2 with Lock, #5-3 without Lock)
After disarming system and opening and closing a door to get a package, the alarm will
rearm automatically unless the ignition is turned on. The system can be programmed to
passively lock the doors with Auto Rearm.
Passive Immobilizer: (Option # 7-2)
The system includes a Passive Immobilizer to activate the Starter Disable relay without
arming the alarm. The LED will flash and the starter disable will activate 30 seconds after
turning the ignition off. This may qualify for an insurance discount.
Trunk / Hatch Pop - Remote Channel 1 (Option # 9)
This feature is designed to interface with existing Factory power trunk or power hatch
release systems and may require additional parts and/or labor charges. To activate, press
and hold the Trunk Button for 3 seconds. The 2-Way LCD remote will confirm activation with
a trunk Button. If the system is armed, it will automatically bypass the trunk and shock
sensor trigger zones until 10 seconds after closing. The system can also be programmed to
disarm with Trunk Pop. Note: This output can also be programmed to operate other
accessories or devices, consult your installer.
Remote Channels 2, 3, 4, 5, and 6 (Optional, Requires special programming)
These outputs are programmable for a variety of functions. The default settings are for
standard features like dome light, horn honk and remote starting. These outputs are
programmable for momentary, latched, or timed. These outputs can only be programmed for
one function.
Channel 2 = then ………….. Option # 10
Channel 3 = then ………….. Option # 11
Channel 4 = then ………… Option # 12
Channel 5 = plus ……….. Option # 13
Channel 6 = plus ………... Option # 14
Consult your installer for available options.