User's Manual

11
WIRING: 18-PIN Connector Cont.
BLUE/BLACK: (-) 500mA Remote Aux. Output 6 (Programmable Option #14)
This is a programmable output that can operate 4 different ways.
Channel 6 = Ignition Run - Default. This is used for Remote Start - Ground when Running. This wire functions as
a Negative IGNITION OUTPUT (Ground while Remote Starting) for use when connecting factory Security Bypass
modules or when an additional external Ignition Relay is required for your installation.
BLACK: CHASSIC GROUND
Connect to body metal of the vehicle using a sheet metal screw and a star washer to ensure a good ground. Keep
the Ground wire short. Scrape away paint or debris from ground location.
GRAY: (-) Hood Trigger and Temperature Sensor Input – Zone # 6
Input trigger for a grounding hood pin switch. Connect to an existing hood pin switch that read ground when open. If
no existing switches are available, install new pin switches if desired. Note: DO NOT mount new pin switches in
water pathways.
Locate Temperature Sensor inside vehicle out of direct sunlight. The Temperature Sensor connects to Gray Hood
switch input as shown.
(-) Hood
Switch
Temperature Sensor
Gray Wire
Alarm Plug