User's Manual

15
WIRING: 2-PIN LED / 2-PIN Program-Valet Button (22 gauge wires)
Mount LED in a visible location on the Dash or Console. Connect the small 2-pin plug from the LED to the control
module. Note: Connectors are designed so that they will only plug into their appropriate slots.
Mount the Valet/Program/Override button in a suitable location. Connect the 2-pin plug from the Switch to the
control module. Note: Connectors are designed so that they will only plug into their appropriate slots.
POWER DOOR LOCKS: WIRING & SYSTEM TYPES
DETERMINING DOOR LOCK TYPE:
We recommend determining the type of locking system the vehicle has before connecting any wires. Incorrect
connection may result in damage to the alarm and/or vehicle locking system. Door lock information is provided as a
guide. Your vehicle may differ.
LOCK RELAY: (On-Board Relay)
WHITE: Normally Closed (Terminal 87A On-board Lock Relay)
GREEN: LOCK Output (Terminal 30 On-board Lock Relay)
VIOLET/BLACK (Fused 10A): Normally Open (Terminal 87 On-board Lock Relay)
UNLOCK (On-Board Relay):
BROWN: Normally Closed (Terminal 87A On-board Unlock Relay)
BLUE: UNLOCK Output (Terminal 30 On-board Unlock Relay)
VIOLET (Fused 10A): Normally Open (Terminal 87 On-board Unlock Relay)