User's Manual

30
PROGRAMMABLE OPTIONS Cont.
13. CHANNEL 4 OUTPUT (Brown/white):
This option controls the function of the Brown/white wire.
1. Channel 4 = Horn Honk - Default. For Horn Honk output.
2. Channel 4 = 1 Second Pulse with Arm. For activating a window roll up module.
3. Channel 4 = Momentary Hold. This is a momentary output as long as the remote button is pressed.
4. Channel 4 = 30 Second Timer.
14. CHANNEL 5 OUTPUT (Orange/white wire):
1. Channel 5 = Accessory - Default. Controls 2
nd
Accessory Output for Remote Start.
2. Channel 5 = OEM Rearm. For arming a factory alarm system.
3. Channel 5 = Latch ON / OFF with ignition reset.
4. Channel 5 = Momentary Hold. This is a momentary output as long as the remote button is pressed.
15. CHANNEL 6 OUTPUT (Blue/black wire):
This option controls the function of the Blue/black wire.
1. Channel 6 = Ignition Run - Default. This is used for Remote Start Ground when Running.
2. Channel 6 = Latch ON / OFF.
3. Channel 6 = Latch ON / OFF with ignition reset.
4. Channel 6 = Momentary Hold. This is a momentary output as long as the remote button is pressed.
16. DISARM WITH TRUNK POP (Aux 1 Green/red wire):
Default = OFF. Controls whether the system will or will not DISARM when the trunk pop or AUX. feature is used.
When the feature is turned on the unit will DISARM when opening trunk or using an auxiliary device controlled by
the Green/Red wire.
17. PARK LIGHTS ON 30 SECONDS WITH DISARM:
Default = ON. Keeps parking lights on when system is disarmed to assist in locating and providing illumination near
your vehicle when approaching at night for safety. The parking light also turns off with ignition on.