User's Manual

11
Trunk / Hatch Pop - Remote Channel 1 (Option # 10 and 16)
This feature is designed to interface with existing Factory power trunk or power hatch
release systems and may require additional parts and/or labor charges. To activate, press
and hold the Trunk Icon for 3 seconds. The 2-Way LCD remote will confirm activation with a
trunk icon. If the system is armed, it will automatically bypass the trunk and shock sensor
trigger zones until 10 seconds after closing. The system can also be programmed to disarm
with Trunk Pop (option # 16). Note: This output can also be programmed to operate other
accessories or devices, consult your installer.
CAR Selection:
You can operate up to 4 vehicles with this remote. Simply press the Car Icon you wish to
operate. The display will show the main menu screen for the car.
CAR Name:
The car name can be changed by pressing the CAR NAME Icon. The
display will show the CAR # with a keypad to change the name.
The Icon goes to the next
selection menu.
Press to save selection.
CAR Logo:
To change the vehicle display Logo, press the LOGO Icon. Press the
Down Arrow to scroll thru the choices. To save the selection, press the
ENTER Key.