User's Manual

Silent Arming:

To Arm without chirps, press the Silent Arm Icon. The 2-Way LCD

Pager will confirm with “System Armed”.

Silent Disarming:

To Disarm without chirps, press the Silent Disarm Icon. The 2-Way LCD

Pager will confirm with “System Disarmed”.

Silent Mode:

To Arm the alarm with silent monitoring of vehicle, press the Silent

Mode Icon. When the alarm is triggered, the pager will notify you of an

alarm trigger without the siren, horn honk or flashing lights. Only the

Starter Kill circuit is active.

Arm without Shock Sensor Zone:

To arm the system without the shock sensor zone, press the NO SHOCK Icon shown above.

The 2-Way LCD Pager will confirm with “System Armed”.

Manual Arming Mode:

The alarm system can be Manually Armed and Disarmed without the remote control. The

door entry will change to a 20 second delay to allow disarm without sounding alarm. This is

useful if you don’t have a remote control or go swimming.

To Activate Manual Mode:

1. Turn Ignition Key off.

2. Press Valet Override Button 3 times and exit vehicle.

3. The system will arm 10 seconds after closing the door.

4. Disarm by Ignition On and press Valet Override button 4 seconds.

Valet Mode: Solid Blue LED

Valet Mode is disables the Alarm and Remote Engine Starting for

vehicle servicing. The alarm system must be disarmed to enter Valet

Mode. To Activate Valet Mode Manually: Turn the ignition on and

press the Valet / Override button [about 5-6 seconds] until the LED

turns on solid. Repeat the process to exit VALET Mode (you hear (2)

siren chirps). To Activate Valet with the remote, press the remote’s

Valet Icon. Repeat this step to exit Valet Mode with the remote control.