User's Manual

9
Emergency Override (Disarm without Remote)
If you have lost the transmitter or it stops working for any reason and the Alarm is armed,
you will have to disarm the system manually. Open the door with the key [alarm will sound],
turn the ignition on, and press the Valet / Override button for about 5 seconds. The Alarm
will disarm and allow you to use the vehicle until you can repair / replace the remote.
Ignition Controlled Door Locks: (Option # 2)
The doors will automatically lock when the ignition is turned on and will unlock when the
ignition is turned off. This feature can be programmed on, off, to lock the doors only or
unlock the doors only. Doors will not lock if they are open to prevent locking the keys in.
Passive Arming Mode: (Option # 6-3)
Passive (automatic) Arming occurs 30 seconds after the ignition is turned off and the last
door is closed. Upon closing the last door, the LED will be flashing rapidly to confirm passive
countdown. If a door is reopened within the 30-second period, the LED will turn OFF as
countdown stops and begin flashing again when the door is closed. Passive arming provides
failsafe protection in case you forget to arm the system.
Passive Locking: (Option # 6-2)
The system can be programmed to passively lock the doors when the system passively arms.
The default setting is OFF because passive locking increases the risk of locking the keys in
the vehicle when the system arms/locks passively, without pressing the remote.
Arming Reminder: (Option # 6-1 = ON, # 6-4 = OFF)
If Passive Arming is turned off, there is a reminder to arm the system 15 seconds after
closing the last door. The system will chirp 4 times to remind you to arm the alarm.
Auto Rearm: Failsafe Protection (Option # 5-2 with Lock, #5-3 without Lock)
After disarming system and opening and closing a door to get a package, the alarm will
rearm automatically unless the ignition is turned on. The system can be programmed to
passively lock the doors with Auto Rearm.
Active Rearm: (Option # 5-4)
Active Rearming means that the system will re-arm itself 30 seconds after being disarmed
with the transmitter if a door has not yet been opened. This is handy if the vehicle is
accidentally disarmed (via the transmitter in your pocket) without you knowing it. This
feature can also be turned off in programming.