Wireless Speaker Kit Instructions Effective November 2019 Wireless Speaker Kit Instructions Art Date 57033 Brand Colors Instruction priorC:72 to use for important safety information. M:15 C:6 M:9 Rockler.com to Y:0 confirm are K:0 using the most recent K:56 that youY:23 version of instructions for your product. Special Notes None 11/19 BMS 10/19 BMS 11/19 DO NOT PRINT DO NOT PRINT Review full Always check Graphics/Designer Brandon Snyder - bmsnyder@rockler.
GENERAL SAFETY WARNINGS This product is designed only for specific applications as defined in the instructions and should not be modified or used for any manner not described in these instructions. Use only recommended accessories. Before using the Wireless Speaker Kit: READ, UNDERSTAND and FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS. KEEP THESE INSTRUCTIONS READILY AVAILABLE FOR FUTURE REFERENCE.
SAFETY WARNING KEY Danger indicates a hazardous situation that, if not avoided, will result in death or serious injury. Warning indicates a hazardous situation that, if not avoided, could result in death or serious injury. Caution indicates a hazardous situation that, if not avoided, may result in minor or moderate injury or property damage. Notice indicates important or helpful information and/or user tips.
PRODUCT SPECIFIC SAFETY WARNINGS CONTINUED > Do not make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance and system performance. > This product is not designed and has not been tested for use in recreational vehicles or on boats. 4 > This product is intended to be used only with the power supply provided. > When working with epoxy, make sure the area is well-ventilated, wear nitrile gloves and use an applicator. Avoid contact with skin or clothing.
Fig. 1 Fig. 2 Assembly Recommended interior dimensions of speaker enclosure: 31⁄4" x 31⁄4" x 23⁄8". The Wireless Speaker Kit, which includes one speaker unit with connector wires and one control unit, can be mounted in solid material or in a hollow or box-type structure. If the two components are to be installed back to back, the distance from the front of the material or box to the back must be at least 2" but no more than 12" to allow wire connections to be made.
Press and RELEASE: Play or Pause Press and HOLD: Power on/off LED Indicator Press and RELEASE: Next audio file Press and HOLD: Increase volume Micro USB Charging Input Press and RELEASE: Previous audio file Press and HOLD: Decrease volume Auxiliary Input Jack Wireless Speaker Controls Connecting to Your Device The LED indicator light will be red while the battery is charging and go off when the battery is fully charged. Battery life is up to four hours. 1.
IDENTIFICATION OF ASSEMBLED PRODUCT 57033 WIRELESS SPEAKER KIT FCC ID: 2AT7N-57033 Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. APPLICABLE COMPLIANCE STATEMENTS NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.