Quick Start Guide

Open the baey cover and install the supplied 2 AAA baeries
and close the baery cover.
Enjoy remote control to bring you the convenience of it.
1
1
2
2
3
2~3cm
1
2
3
3
Press and hold the IR learning buon for 3 seconds, then the
LED indicator glow purple that means you have entered the
IR learning mode.
If you want to clear the saved IR values of the IR learning buons,
press and hold OK buon and Delete buon at the same time
for 3 seconds.
Installation♦
LED Indicator of RC01BT♦
Warranty Info.
♦
Product Info.
♦
Contact Us
♦
FCC Statement
♦
Turn on Bluetooth on your device while holding down the re-
turn key and all app key of RC01BT. The red and blue lights
will ash alternately, then your device can nd RC01BT and
can be paired with Bluetooth.
Please keep 2~3 cm distance between the front end of RC01BT
and with the front end of the other remote that you want to
learn. Press the specic buon that you want to learn on the
other remote to sta the IR learning. The IR learning is com-
pleted when the LED indicator is o.
IR Learning of RC01BT♦
Aer RC01BT is connected to the device
successfully, the LED indicator on the
remote will glow red when you press
any buon on the remote.
If RC01BT is not connected properly with
the device, the LED indicator on the re-
mote will ash in blue.
If you are pairing RC01BT with the device, the LED indicator
will ash both red and blue alternately. The LED indicator is
o when Bluetooth pairing is nished.
Please check with your local distributor, agent, or retailer that you
purchased from for the limited product warranty terms of RC01BT
and the accessories.
FCC 15.19 :
THIS DEVICE COMPLIES WITH PART 15 OF THE FCCRULES. OPERATIONS IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: ( 1 ) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE AND ( 2 ) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED, INCLUDING INTERFEERENCE THAT MAY
CAUSE UNDESIRED OPERATION (15.19)
FCC 15.21:
The changes or modications not expressly approved by the pay responsi-
ble for compliance could void the user’s authority to operate the equipment.
FCC 15.105:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to pa 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful inteerence in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the inst-
ructions, may cause harmful inteerence to radio communications. However,
there is no guarantee that inteerence will not occur in a paicular installa
tion. If this equipment does cause harmful inteerence to radio or television
reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the inteerence by one or more of
the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
RF exposure warning:
Product Name : Bluetooth Voice Remote
Brand/Model Name : RockTek/RT-RC01BT
Connection Mode : Bluetooth
Bluetooth Transmission Distance : 10M
Baery : AAA x 2
System : Android
Made in China
Manufacturer : RockTek Co., Ltd.(Taiwan)
Ocial Website : www.RockTek.com.tw
Email Suppo : suppo@rocktek.com.tw
CCAL19LP2680T2FCC ID:2AFIVRT-RC01BT
This device contains transmiers and receivers which emit Radio Frequency
(RF) energy. The device is designed to comply with the limits for exposure
to RF energy set by the Federal Communications Commission (FCC) of the
United States, Industry Canada (IC) of Canada, and the regulating entities
of other countries.