Manual

Descriptions continued.........
THORNS Control - This control determines the intensity and tracking
(-12 steps) of the Octave below the note played.
MERGE Control -The control determines the mix between the original
input and the Octave effect.
9VDC Input - This input jack provides 9VDC power to the pedal from
the Rocktron DC OnTap 9V power supply (sold seperately).
FRAGRANCE Control - This control determines the overall tonal
color of the effect.
ROOTS - THIN/THICK Switch - This switch allows you to select
THICK (heavy crunch) or THIN (smoother crunch) added to the effect.
INPUT Jack - Using a standard 1/4” guitar cable, plug your guitar into
this jack.
FOOTSWITCH - Use this switch to turn on or off the pedal. The On/
Off Led will show you if the pedal is on or off.
ON/OFF Led - This LED shows if the pedal is on or off. When the
LED is light the pedal is on. When the LED is not light the pedal is
off.
OUTPUT WET Jack - This jack provides the mixed Octave effect with
the original signal.
OUTPUT DRY Jack - This jack provides the original signal feed
through with no effect.
1
2
3
4
5
6
7
8
9
10