User guide

Controller Assignments

The Controller Assignment function allows for specific Chameleon adjustable parameters to be mapped (or

assigned) to a MIDI controller for real-time control by an expression pedal. The Controller Assignment option also

lets you store an upper and lower parameter value limit which the controller cannot exceed. For example, when

using an expression pedal with a Rocktron All Access

to send continuous control changes to control the "PITCH"

parameter, an upper limit of +300 can be set and a lower limit of -200 can be set—even though the actual param-

eter range is from +1200 to -2400. When the expression pedal is at its heel position in this example, the "PITCH"

parameter will be at -200, while at its toe position it will be at +300. Up to eight controllers can be assigned for

each individual preset.

Step 1

To access the Controller Assign function, turn the FUNCTION SELECT control clockwise to

"CONTROLLER ASSIGN".

3,6,9,12 4,7,10,13 2,5,8,11 1

CONTROLLER ASSIG

Step 2

Turn the PARAMETER SELECT control for the first parameter of the Controller Assign

function. This parameter allows you to select a controller number for the NUMB 1 parameter

to respond to.

NUMB 1 XXX

Use the PARAMETER ADJUST control to select the controller number to be assigned to the

PARA 1 parameter. Any number from 0 to 120 may be selected, as well as OFF (will not

respond to MIDI control changes). Match the number selected for this parameter with the

controller number on the MIDI transmitter.

NUMB 1 7

This parameter (NUMB 1 only) also gives you the option of selecting "ADJ". When "ADJ" is selected, the

parameter assigned to the first controller (PARA 1) can be instantly accessed by turning the PARAMETER AD-

JUST control when the preset title is displayed. This allows you to access a parameter that you adjust frequently

without paging through function headings and parameters.

Step 3