User guide

MIDI Dump/Load

Any or all of the Chameleon presets may be dumped to a sequencer or another Chameleon via system exclusive

messages. The information exchanged when performing a MIDI Dump consists of parameter values, title characters and

controller assignment/limit information. When dumping a single preset into another Chameleon, the dumped preset may be

loaded into any preset location on the receiving Chameleon.

To dump a single Chameleon preset into another Chameleon:

IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving

Chameleon back to the MIDI IN of the transmitting Chameleon.

Connect a standard MIDI cable from the MIDI OUT of the transmitting Chameleon to the MIDI IN on

the receiving Chameleon.

Step 1

Turn the FUNCTION SELECT controls on both the transmitting and receiving Chameleons until

"MIDI DUMP/LOAD" is displayed on each.

Step 2

Step 3

Turn the PARAMETER SELECT control on each unit one step clockwise to "PR DUMP/ LOAD".

MIDI DUMP/LOADMIDI DUMP/LOAD

1 PR DUMP/LOAD1 PR DUMP/LOAD