User guide

To dump the Chameleon memory into a sequencer:

Step 1

Connect a standard MIDI cable from the MIDI OUT of the transmitting Chameleon to the MIDI IN on

the receiving sequencer.

IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving

Chameleon back to the MIDI IN of the transmitting Chameleon.

Turn the FUNCTION SELECT controls on the transmitting Chameleon until "MIDI DUMP/LOAD" is

displayed.

Turn the PARAMETER SELECT control on the transmitting Chameleon until "BULK DUMP/LOAD"

is displayed.

Step 2

Step 3

Start the sequencer recording.

Step 4

MDI DUMP/LOAD

BULK DUMP/LOAD

RECORD