User`s manual

The first function displayed after turning the FUNCTION SELECT control is the Global function. The param-

eters provided in this function affect all presets (i.e. the settings stored for these parameters are the same for all

presets).

The PARAMETER SELECT control will allow you to access these Global parameters:

GLOBAL Function

The OUTPUT parameter determines whether the output of the Chameleon is a stereo

(left and right) signal or two mono signals.

This SPEAKER SIMULATOR parameter under the Global function allows you to globally

(all presets) lock the Speaker Simulator off (LOCKOFF) so that it will always be off for all

presets - regardless of the status of the "SPKR SIM" parameter under the Speaker

Simulator function. It may also be locked on for the left channel (LOCK L) or on for both

channels (LOCK B).

Note: The Chameleon will only recognize the "SPKR SIM" parameter under the Speaker

Simulator function when this parameter is stored as UNLOCK.

The HUSH OFFSET parameter allows you to globally (all presets) adjust the HUSH

Expander Threshold. This means that if this parameter is altered from 0dB to +3dB, the

Expander Threshold will be 3dB higher for all presets. This feature can be useful when

switching from a quiet guitar with passive electronics to a noisy guitar with active elec-

tronics - as the active guitar would require a higher Threshold level in all presets.

The MUTE parameter allows you to mute the output of the Chameleon. This feature is

especially useful when changing guitars during a live set. If a Rocktron All Access

used in remote mode with the Chameleon, a single All Access button can be configured

as a momentary switch which will mute the output when it is held down. (See "Using a

Chameleon with a Rocktron All Access in REMOTE mode".)

OUTPUT

SPKR SIM

HUSH OFFSET

MUTE