Owner manual

CH. A (MONO) IN jacks

This XLR and ¼" mono jack provide inputs to the left channel of the HUSH Pro. Use

either the XLR jack or the ¼" jack when connecting, but not both together. When using

only one input use the "CH. A (MONO) XLR or ¼" jack".

CH. B IN jacks

This XLR and ¼" mono jack provide inputs to the right channel of the HUSH Pro. Use

either the XLR jack or the ¼" jack when connecting, but not both together.

CH. A

jacks

This XLR and ¼" mono jack provide the output from the "CH. A (MONO)" channel of the

HUSH Pro.

CH. B jacks

This XLR and ¼" mono jack provide the output from the "CH. B" channel of the HUSH

Pro.

Note: When "CH. A" is used as a single signal source, the signal will be

present in both the "CH. A" and "CH. B" outputs.

POWER jack

This 2.5mm pin jack accepts power from the 9VAC adapter supplied with the HUSH Pro.

Rear Panel