Manual

17
TITLE EDIT Function
The Title Edit function allows you to create a unique name for your preset. The
Parameter select knob is used to move the cursor. The Parameter adjust knob is
used to change the "character" in the title.
TITLE EDIT
PARAMETER SELECT = CHARACTER POSITION
PARAMETER ADJUST = CHARACTER SELECT
IMPORTANT:
When you have completed editing the TITLE you must execute STORE before leaving the TITLE
EDIT function.
The next function displayed after turning the FUNCTION SELECT knob is the "True-Bypass"
function.
The PARAMETER SELECT knob will allow you to access these Global parameters:
TRUE BYPASS Function
This TBYPASS parameter allows you to select either "ON" or "OFF". When
"ON" the True Bypass is active and the signal passes directly through the HUSH
Ultra unaffected. When "OFF" is selected the unit is active and True Bypass is
off and HUSH is active.
TBYPASS
TRUE BYPASS uses high quality relays to perform a total bypass of the HUSH ULTRA when us-
ing the ¼ jacks.
This may be activated in the EDIT MODE or via the BYPASS button on the front panel.
True bypass state will be stored into the preset.
TRUE BYPASS:
TBYPASS OFF/ ON
TBYPASS MCC OFF..120 MCC assigned to TBYPASS
Note: TBYPASS MCC is programmable per preset.