Manual

Any or all of the HUSH Ultra's presets may be dumped to another HUSH Ultra a sequencer or MIDI

utility program using a PC midi interface to create a ( .syx ) ﬁle. All the information about the presets

you have created will be dumped consisting of parameter values, title characters and controller assign-

ments. When dumping a single preset into another HUSH Ultra, the dumped preset can be loaded into

any preset location on the receiving unit.

Note: The HUSH Ultra midi data when sent by external means such as a PC MIDI utility program you

will need to conﬁgure it as stated below.

Buffer size 264 bytes

No of buffers 16 both RX and TX

100ms between buffers be used initially as a starting point.

100ms after F7 [ optional ]

If a MIDI sequencer is used to store the data record the Sysex data in real-time or adhere to the param-

eters given above.

MIDI DUMP/LOAD

Step 2

Step 3

M I D I D U M P / L O A D

Step 1

Connect a standard MIDI cable from the MIDI OUT of the transmitting HUSH Ultra

to the MIDI IN of the receiving HUSH Ultra. Consult MIDI Connection drawing for

more information.

If you are dumping a single preset to another HUSH Ultra, the transmitting HUSH

Ultra must have that preset selected.

Press the "STORE/EDIT" button to enter into the "EDIT MODE". Turn the FUNC-

TION SELECT knob to MIDI DUMP/LOAD.

Step 4

On the receiving HUSH Ultra use the PRESET Select control to select the preset

location where the received preset will be stored. Note that the preset currently stored

at the selected location will be lost when the new preset is received.