Manual

8
The HUSH ULTRA default operation settings are:
MIDI CHANNEL = OMNI
PROGRAM CHANGES = ON
PROGRAM MAPPING = OFF
HUSH ACTIVE = IN
PROGRAMMING PRESETS:
1. Choose preset number by turning the PRESET/FUNCTION SELECT Knob or use Midi Controller.
2. Adjust Hush threshold control to eliminate noise and hiss by turning the HUSH THRESHOLD/PARAMETER
SELECT Knob
3. Adjust Gate Threshold by using the GATE THRESHOLD/PARAMETER SELECT knob
***Note: If you want desired preset to be a True Bypass preset press the Bypass button now***
4. Press and release the STORE/EDIT button to save your changes
5. The display will blink “ STORE AT PRESET “
***Note: to cancel the store mode at anytime turn the PARAMETER ADJUST KNOB***
6. Use the PRESET/FUNCTION SELECT knob and pick the destination preset where you would like to save your
changes.
7. Press and release the STORE/EDIT button.
* You must adjust the Hush Threshold or Gate Threshold in order to use the store function. When not in the EDIT
mode if you want to store the current changes to the preset the store button must be pressed within 5 seconds after
the initial change. After 5 secs the HUSH ULTRA will return to the preset name standby mode. To store the changes
simply re-adjust either the Hush Threshold or Gate Threshold and press store.
HUSH Ultra Quick Start