Instruction Manual

Factory Restore

The Factory Restore function allows you to restore altered MultiValve presets to their original condition as

shipped from the factory. Either the entire MultiValve memory can be restored, a single preset can be restored to any

preset location, or the controller information alone can be restored.

Step 1

Turn the FUNCTION SELECT control clockwise to "FACTORY RESTORE".

FACTORY RESTORE

Step 2

Turn the PARAMETER SELECT control one step clockwise to "RESTR 1 TO 1". The

number on the left is the original factory preset number to be restored. The number on the

right is the preset location that the preset will be stored into.

RESTR 1 TO 1

Factory preset to be restored Preset location to store into

Step 3

Turn the PRESET control to select the factory preset to be restored.

RESTR 98 TO 1

Step 4

Turn the PARAMETER ADJUST control to select the preset location to store the restored

preset into.

RESTR 98 TO 22

Restoring a single factory preset:

Operating the MultiValve

34521