Instruction Manual

66
Step 3
Turn the FUNCTION SELECT control clockwise to "REMOTE CONTROL".
REMOTE CONTROL
Step 4
Turn the PARAMETER SELECT control one step clockwise to display "REMOTE".
REMOTE OFF
Step 5
Turn the PARAMETER ADJUST control to select "ON".
REMOTE ON
Operating the MultiValve
Step 6
Press the STORE button to save the Remote on/off status. "STORED" will flash briefly.
REMOTE ON
Step 7
If the MultiValve titles are to be displayed on the All Access, turn the PARAMETER SE-
LECT control to "TITLE XFER".
TITLE XFER OFF
Step 8
Turn the PARAMETER ADJUST control to "ON" to enable title transfers from the
MultiValve to the All Access display.
TITLE XFER ON
Step 9
Press the STORE button to save the Title Transfer on/off status. "STORED" will flash briefly.
STORED