User Manual

Descriptions continued.........

OUTPUT & TONE Control - The larger outside knob

(Tone Control) controls the nal HIGH FREQUEN-

CY. The smaller inside knob (Output Control) adjusts

the nal output gain 0db to +3dBu.

GERMANIUM DIODES Switches - these two switch-

es turn ON and OFF the positive and negative portion

of the overdrive.

+ Applies clipping to the positive portion of overdrive.

- applies clipping to the negative portion of overdrive.

9VDC Input - This input jack provides 9VDC power

to the pedal from the Rocktron DC OnTap 9V power

supply (sold separately).

DRIVE & D-RANGE Control- The larger outside

knob (D-Range Control) Determines how much

soft knee clipping compression is applied. Controls

dynamic range (waveform excursion) of the assigned

+ or – Germanium process. The smaller inside knob

(Drive Control) adjusts the overdrive gain (before the

Germanium diode circuitry.

INPUT Jack - Using a standard 1/4” guitar cable, plug

your guitar into this jack.