Manual
Table Of Contents
- 1. Introduction
- 2. Front Panel
- 3. Rear Panel
- 4. Connections
- 5. Operation
- A. Selecting a preset
- B. Creating a new preset
- C. Storing a modified preset to a different preset location
- D. To copy a preset to a new location
- E. Setting the HUSH® Threshold
- F. Selecting a Power-up preset
- G. Using the Piranha with a Rocktron All Access’ in REMOTE mode
- 6. Special Functions
- A. Factory Reinitialization
- B. MIDI Preset Dump
- C. MIDI Preset Load
- D. Continuous Controller Mode
- SPECIFICATIONS
8
5. Operation
5. Operation
A. Selecting a preset
To select a preset on the Piranha, use the UP and DOWN buttons to scroll through the successive presets - each
preset selected is recalled automatically.
23 - - -
B. Creating a new preset
23 - - -
Use the front panel knobs to adjust the parameters until the desired sound is
achieved. (The store button will blink after any preset parameter has been
changed from its stored value.)
Use the UP and DOWN buttons to select a preset to modify. (The preset will be
recalled automatically.)
12 - - -