Manual
Table Of Contents
- 1. Introduction
- 2. Front Panel
- 3. Rear Panel
- 4. Connections
- 5. Operation
- A. Selecting a preset
- B. Creating a new preset
- C. Storing a modified preset to a different preset location
- D. To copy a preset to a new location
- E. Setting the HUSH® Threshold
- F. Selecting a Power-up preset
- G. Using the Piranha with a Rocktron All Access’ in REMOTE mode
- 6. Special Functions
- A. Factory Reinitialization
- B. MIDI Preset Dump
- C. MIDI Preset Load
- D. Continuous Controller Mode
- SPECIFICATIONS
9
Press the STORE button once again to save the modified preset in the selected
preset location. (The preset currently stored in this location will be written over.)
51 - - -
Press the STORE button twice to save the changes made in the current preset
location. (Note: Completing this step will copy over the preset stored in the
current location.)
12 300
C. Storing a modified preset to a different preset location
Repeat steps 1 and 2 described in "B. Creating a new preset".
Press the STORE button once (the STORE button will blink faster).
Use the UP and DOWN buttons to select the preset location to store the new
preset into. (Note: Skip this step if the changes are to be stored in the current
preset location.)
55 450
- - -
- - -
25
* * * * To cancel any storing function, press the GLOBAL button twice. * * * *