Manual
Table Of Contents
- 1. Introduction
- 2. Front Panel
- 3. Rear Panel
- 4. Connections
- 5. Operation
- A. Selecting a preset
- B. Creating a new preset
- C. Storing a modified preset to a different preset location
- D. To copy a preset to a new location
- E. Setting the HUSH® Threshold
- F. Selecting a Power-up preset
- G. Using the Piranha with a Rocktron All Access’ in REMOTE mode
- 6. Special Functions
- A. Factory Reinitialization
- B. MIDI Preset Dump
- C. MIDI Preset Load
- D. Continuous Controller Mode
- SPECIFICATIONS
14
Setting up the All Access for remote operation
Refer to the All Access
™
user's manual for detailed information on editing the All Access
™
.
Set the Operating Mode to "REMOTE".
Set the Bank Size to "10".
Reinitialize only the controller information for the instant access switches and
pedals using a reinitialization code of "231".
Set the Operating Mode to "REMOTE".
When operating in Remote mode with a Piranha, switches 1-10 act as normal preset switches, while switches 11-14
provide specific functions, as illustrated below.