User Manual

2
Front Panel
7
5
3
4
6
1
1
2
INPUT jack
Connect your guitar output to the 1/4" input jack with a shielded guitar
cable.
OVERDRIVE button
When pressed IN, OVERDRIVE mode is engaged.
GAIN control
Adjusts the amount of amplification in the preamp. This sets the
amount of harmonic distortion the amp will generate. Turn the knob
clockwise to increase distortion and counterclockwise for a cleaner
sound.
LEVEL control
The LEVEL control adjusts the volume. While GAIN sets the amount
of amplification in the preamp, LEVEL sets the volume in the last
stage of the unit. Once the GAIN is set, adjust the volume with the
LEVEL control.
TREBLE & BASS controls
Tone controls, or EQ. The BASS raises or lowers the amount of low
frequency sound while TREBLE does the same for the high
frequencies.
PHONE (Headphone) jack
Plug your headphones into this jack to bypass the power amp and
practice in private.
POWER switch and LED
The switch turns the amp ON and OFF. The red LED shows the amp
is ON.
3
4
5
6
Back Panel
2
7